The bushing inside diameter is 0.25" and the shaft is 0.217".
Here is a pic of the drive gear and shaft pulled out from the housing bushing:
StudeM15A-20 Rescue Project I bought this old Stude truck off ebay in 2010 and have been working on it since. I don't plan to restore it but just get it in useful condition and enjoy it's utility.
Friday, July 29, 2011
Speedometer Drive Gear
Not sure what happened here. The speedometer drive gear shaft bushing is way to big for the shaft. Is there a missing bushing? The transmission housing has a brass bushing in it and the shaft appears to have wear marks.
The bushing inside diameter is 0.25" and the shaft is 0.217".
Here is a pic of the drive gear and shaft pulled out from the housing bushing:
The bushing inside diameter is 0.25" and the shaft is 0.217".
Here is a pic of the drive gear and shaft pulled out from the housing bushing:
Tuesday, July 12, 2011
Tranny
Rebuilding tranny...
1. Mainshaft:
L=1-7/8"
D=1.5"
Splines=10-6
Pilot=0.815"
2. Drive Shaft:
Pilot=0.625"
L=8-3/8"
D=1.125"
3. Counter Saft
L=9-7/16"
D=1"
1. Mainshaft:
L=1-7/8"
D=1.5"
Splines=10-6
Pilot=0.815"
2. Drive Shaft:
Pilot=0.625"
L=8-3/8"
D=1.125"
3. Counter Saft
L=9-7/16"
D=1"
Sunday, July 10, 2011
Saturday, July 9, 2011
Subscribe to:
Posts (Atom)